Interconnecting Cisco Networking Devices (CCNA), Part 5 of 5: Network Device Management

The Interconnecting Cisco Networking Devices Part 2 (ICND2) is the exam associated with the Cisco Certified Network Associate certification. The last part in this series covers network device management and protocols. IT will cover SNMP, syslog services, NetFlow and how routers work at the hardware level. It will finish with Cisco devices for small or medium sized environments.

Lesson 1:

• Overview
• SNMP Versions
• Obtaining Data from an SNMP Agent
• Obtaining Data from an SNMP Agent Continued
• SNMP Configuration
• Syslog Format
• Syslog Configuration
• NetFlow Overview
• NetFlow Overview Continued
• NetFlow Components
• Flow
• NetFlow Architecture
• Demo: Configuring NetFlow
• Configuring NetFlow Continued
• Summary.

Lesson 2:

• Internal Components of a Router
• What does ROM Do
• Router Bootup Sequence
• Configuration Register
• Changing the Configuration Register
• How the IOS Is Found
• IOS Loading
• IOS Loading Continued
• Loading the IOS Configuration File
• Loading the IOS Configuration File Continued
• Cisco IOS Integrated File System
• Viewing the Integrated System
• Managing IOS Images
• Reading the IOS Filename
• Backing up the Image
• Backing up the Image Continued
• Upgrading the IOS
• Upgrading the IOS Continued
• Copy Command Result
• Managing Device Configuration Files
• Managing Device Configuration Files Continued
• Recovering the Enable Password/Secret
• Recovering the Enable Password/Secret Continued
• Summary.

Lesson 3:

• Demo: Router Logs
• Demo: Severity Levels
• Demo: Router Secrets
• Demo: Changing a Router Secret
• Demo: Remove Configurations
• Licensing Intro
• Demo: Basic Configuration
• Demo: Create Sub-Interfaces
• Demo: Trunking
• Overview of Licensing
• Overview of Licensing Continued
• Verifying the Licenses.

Lesson 4:

• Installing a Permanent License
• Installing an Evaluation License
• Back up the License
• Uninstalling the License
• Password Recovery
• Recovery
• Config-Register
• Config-Register Continued
• Universal Images
• Demo: Create Channel Groups
• Demo: Channel Group Verifications
• Demo: Multiple Hosts Per Port
• Demo: DHCP Service
• Demo: Prepare for IPv6 Addresses
• Demo: Assign IPv6 Addresses
• Demo: IPv6 Neighbors.

Lesson 5:

• Demo: Configure Serial Links
• Demo: Encapsulation
• Demo: Frame Relay for Links
• Demo: NAT
• Demo: IP Translations
• Demo: Routing Protocols
• Demo: OSPF Interface
• Demo: .

Lesson 6:

• Demo: EIGRP
• Demo: EIGRP Continued
• Demo: IPv6 Neighbors
• Demo: Control Server Access
• Demo: Access List
• Demo: Troubleshoot Access List
• Demo: Per-VLAN Spanning Tree.