Cisco CCNP Implementing Cisco IP Routing , Part 1 of 4: Planning and EIGRP

Implementing Cisco IP Routing is a qualifying exam for the Cisco Certified Network Professional CCNP®. This course starts off with describe common enterprise traffic requirements and how to plan for implementing routing in an Enterprise network. Next it covers a review of routing fundamentals. Then it will describe EIGRP, how to plan EIGRP routing as well as optimization and in the Enterprise WAN.

Lesson 1:

• Traffic Conditions in a Converged Network
• IIN: Cisco Intelligent Information Network
• 3 Phases of the Intelligent Information Network
• Cisco SONA Framework
• SONA Layers
• Updated SONA Framework
• Cisco Enterprise Architecture
• Architecture Types
• Cisco Hierarchical Network Model
• The Enterprise Composite Network Model.

Lesson 2:

• Creating an Implementation Plan
• Implementation Plan Approaches
• Methodologies and Models
• Cisco Lifecycle Services (PPDIOO) Model
• Implementation Plan Documentation
• Sample Implementation Plan
• Examples of Project Documents.

Lesson 3:

• IP Routing
• Third Option: OnDemand Routing
• Link-State vs. Distance Vector Protocols
• Classless vs. Classful Routing
• Discontinuous Subnets
• IP Classless Command
• Automatic Route Summarization
• Routing Table Criteria
• Administrative Distance
• Floating Static Route
• Demo: RIP Next Generation Setup
• Demo: RIP Next Generation Setup Continued
• Demo: Set up a Static Address
• Demo: Configure RIP Next Generation
• Demo: Configure RIP Next Generation Continued
• Demo: Troubleshooting.

Lesson 4:

• EIGRP Attributes and Capabilities
• Terminology of the EIGRP Protocol
• Tables Used with the EIGRP Protocol
• FD vs. AD
• Feasible Successor and Active vs. Passive Routes
• Major EIGRP Technologies
• Reliable Transport Protocols
• Neighbor Discovery and PDMs
• DUAL Finite-State Machine
• Packet Types Used by EIGRP
• EIGRP Administrative Distance
• EIGRP Metric Calculation and Bandwidth.

Lesson 5:

• EIGRP Deployment Prerequisites and Implementation
• EIGRP Verification and Documentation.

Lesson 6:

• Enable EIGRP Routing
• Demo: Enable EIGRP
• Automatic Summarization
• Demo: Automatic Summarization
• EIGRP Commands
• Demo: Automatic Summarization
• Passive-Interface and Default Route Propagation
• Demo: Passive-Interface
• IP Default Network Command and Route Summarization
• Demo: IP Default Network
• Demo: Next Hop
• Interface Summarization
• Demo: Next Hop Continued
• Creating a Summary Route
• Demo: Summarization.

Lesson 7:

• WAN and Enterprise Considerations
• Demo: Frame Relay Using Dynamic Mapping
• Load Balancing with EIGRP
• Demo: EIGRP over Layer 3 MPLS VPN
• Demo: EIGRP over Layer 2 MPLS VPN
• Unequal EIGRP Cost Load Balancing
• EIGRP Bandwidth to Use on WAN Links.

Lesson 8:

• Authentication in Routers
• Comparing MD5 to Simple Password
• Preparing to Configure EIGRP Configuration
• Demo: EIGRP Authentication
• The Configuration of EIGRP Authentication
• Demo: Configure the Keychain.

Lesson 9:

• Demo: Enable Authentication with the Keychain
• EIGRP Scalability
• Query Process and Stuck-in-Active
• Summarization: SIA Solution
• Stub Networks
• Demo: Add IPv4 Addresses
• Demo: Add IPv4 Addresses Continued
• Demo: Configure EIGRP
• Demo: Configure EIGRP Continued.